Luke Martinez

MSA Stage 3 Prize 2022 Winner

Natural Lighting
This design strives to minimise the requirement for artificial lighting. It accomplishes this through utilising the natural verticality of the Applecross site, allowing the design to ‘step’ up, creating many opportunities for different apertures, letting sunlight to permeate into the building.

The assembly space is central within the scheme. It lends itself to a multipurpose programme by nature, therefore, this room has a required degree of flexibility.

To accommodate such a large space without the associated demands on operational energy, a complex system of sky lighting was developed.

This method of lighting can often bring harsh light shafts which aren’t ideal when attending an event. Therefore, a series of ceiling buffers have been employed to diffuse the incoming light creating several light wells. This results in a pleasant environment with multiple moments of rebounding light.

Rainwater Collection
Glasgow experiences high levels of precipitation throughout the year. The high being in October with an average of 80.5mm of precipitation and the low being in May with 34.4mm.

Rainwater harvesting has been implemented in the design by joining up the gutters in different quadrants to 3 water collection tanks on site. This water may be filtered for it to be consumed, however, there are other ways to recycle grey water.

One of the main wastes of water in modern day residential housing is in flushing the toilet, the average person flushes away roughly 5l per day. The rainwater that is harvested from the roof collection system, instead of being filtered, it will simply be used as grey water.

Offsetting the water consumption within the accommodation of the Hub. There will be separate collection systems for both wings of the accommodation as well as for the rest of the HUB.

Environmental Control
Heating, cooling, and humidity management are dealt with by geothermal heating and cooling systems.
Unlike a furnace, geothermal heating, and cooling systems function by moving heat rather than converting chemical energy to heat. Mitigating the environmental impact of burning fuel.
During the winter months this system will passively heat the building by extracting cold air, heating it up within the earth then pumping it out into the internal spaces. In the summer months this same system will extract the warm air, cool it, and push it out into the building.

Materiality
The use of Glu-lam for the principal structural parts was motivated by a desire to follow a more environmentally conscious construction strategy as well as the need for an open plan area, which necessitated longer spanning elements. It also has more strength than solid wood, which contributes to the building’s structural stability and longevity.

The building’s perimeter panelling is mostly made of CLT, which decreases the building’s overall embodied carbon and requires less material to make adequate foundations because it is lighter than most other materials. My design also necessitates several complicated and large entrances as well as custom windows; CLT is a very practical material that can be adapted to meet these requirements.

Because much of the site requires to be cut and filled, the land’s appropriateness may be lessened, resulting in an unsuitable surface for the building to sit on. In response to this, I’ve chosen to employ a concrete raft as a more robust foundation.

More on our Tumblr feed